Water contains a variety of minerals and salts such as carbonates, bicarbonates, chlorides and nitrate. TDS is the parameter that measures the total sum of all of these compounds. TDS 1 is a simple and affordable tester for TDS measurements. Due to its internal sensor, TDS measurements are automatically compensated for temperature variations. Calibration can be performed in one point with a trimmer. The tester is supplied with a cap that protects the probe when it is not in use. Batteries can be easily replaced. Light and small, TDS 1 is an ideal pocket meter to perform quick TDS measurements. TDS 1 is supplied with protective cap, calibration screwdriver, batteries. Range: 0 to 999 parts per million ( milligrams per liter). Resolution: 1 parts per million ( milligrams per liter). Accuracy: +/-2 percent F.S. Calibration solution: HI 70080P. Calibration: manual, 1 point, through trimmer. Temperature compensation: automatic, 5 to 50 degree C (41 to 122 degree F). Battery type/life: 4 by 1.5V/approx 150 hours. Environment: 0 to 50 degree C (32 to 122 degree F); RH max 95 percent. Measures 5-57/64? length by 1-3/16? width by 0-51/64? height. Weight: 70 g (2.5 oz).
HANNA TDS Meter TDS-1 is made of high-quality ABS material, and the surface layer is coated with the anti-static layer. The anti-static ability is higher than that of an ordinary TDS controller, and it is durable and durable. The live digital display shows the TDS value and the backlit display makes the observations clearer. SMT placement technology; ergonomic design with adapters and boxes for easier carrying. It can be continuously measured for 24 hours to avoid reading errors caused by low battery. Equipped with a BNC composite electrode for easy electrode replacement.
SPECIFICATION
[ITEMPRICE]